Wealthy investors in tax-efficient tax avoidance schemes would do well to look at the Dahle 507 scheme to slice cleanly through a tax return.
You may just want to take 2 mil off your tax return or maybe go for the full slice down the middle – either way, it is a safe cut that won’t get you on the front page of the Times Newspaper. If you use a Dahle trimmer or guillotine you can not only reduce the size of your tax return but you can write off the cost of purchase against your income tax.
George Osbourne said it was morally repugnant to avoid tax but he would probably admit that cutting your tax return using a trimmer like the 507 or 508 (both of which are on special offer on the Dahle Sales website) was just good tax return planning.
Dahle 00507 Cut your tax problems instantly
The trimmers are from Germany and they will undoubtably be used to trim the Greek deficit. No-one would blame the Greeks for looking to save a few Euros by buying a quality product like the 507 or 508 but few would advocate taking out a loan to do so.
So there you are – don’t forget Trimmers are not just for trimming paper, card board and photos – they are the answer to most problems of the world today.
Next week – Trimmers, Climate Change and cutting omissions.
Dahle Sales has the entire range of Dahle Guillotines, Trimmers and Shredders to choose from backed up with great service and spare supplies.
Posted in Business News
Tagged climate change, dahle 507, dahle trimmer, germany, greeks, income tax, photos, quality product, shredders, special offer, tax avoidance schemes, tax return, trimmers, wealthy investors, world today
Following a glitch in production caused by the upheaval in Japan, and shortages in Poland, all Dahle trimmers and guillotines are back in stock and ready to deliver.
The previously affected product codes are;
We try to give the best information to our customers to avoid delays. If you need a quick answer to a stock question, please call 01733 405112 and ask for Nigel
Though the vast majority of DAHLE’s exceptional quality productions remain unaffected, there is currently a slight issue with production which affects the delivery estimates for some of our products.
Customers wishing to purchase the products listed below are advised to contact us on 0800 074 7234 between 09:00am and 05:30pm prior to placing an order to find out whether or not we currently have any in stock. Otherwise, customers are advised that the following products may take up to four weeks to be produced and delivered from the date of order:
We apologise for any inconvenience that this may cause our customers and will endeavour to keep you informed once this production issue is resolved.
All product descriptions for affected products have been updated to reflect these circumstances to hopefully avoid any confusion or disappointment after an order has been placed.
Posted in Dahle Product Information
Tagged 00440, 00446, 00533, 00534, 00550, 00552, 00554, 00556, 00558, 00867, dahle, dahle delivery, delay, delivery, production issue, shipping
“Don’t let your business become someone else’s.”
An excellent tag line here at DAHLE Sales that sums up our products and what we’re trying to achieve for our customers and their businesses. It’s no secret that if information about how you conduct your business gets into a competitors hands, you stand to lose any edge that you might have over them.
This is amplified ten-fold when taken to a government level, and only last week, business secretary Vince Cable MP has apologised after confidential documents were found in the bins left outside his constituency office in Richmond and Twickenham. The documents consisted of letters from ministers and contained details of Liberal Democrat constituents. Only last month, West Dorset MP Oliver Letwin also apologised after being found disposing of similar confidential documents in a bin in publicly accessible St James’ Park.
Especially when approaching confidential levels of business conduct like government, the correct adherence to data protection laws and secure shredding of confidential documents needs to be observed.
DAHLE Sales offers an eclectic range of secure document shredders suitable for high-level business, to literally prevent your business from becoming someone else’s.
Take a look at our range of security level 5 and security level 6 shredders today.
Every workplace could do with a little additional security.
Dahle is clearing the last few 2010 shredder machines with all these paper shredder models offered at the lowest possible prices. So the time is right to grab your shredder bargain.
Shredding machines, document shredders and large heavy duty light idustrial shredders are listed below at substantially less than both the original Dahle Sales retail price and recommended retail price. These models are all covered by the standard Dahle Manufacturers warranty and are supported for spare parts and service.
These shredders are offered subject strictly to the stock remaining available for sale and the offer will not be repeated. Bulk purchase of the batch will be considered.
Models and prices follow. Please call 01733 405112 if you need instant decisions. The model links will take you to the product in our store.
||Stock as at 01/08/2011
||Price each including delivery ex VAT
||Personal shredder – 7 mm strip cut, feed width 220 mm
||Personal shredder – 3,9 mm strip cut, feed width 220 mm
||Personal shredder – 3,9 x 40 mm cross cut, feed width 220 mm
||Deskside shredder – 3,9 x 40 mm cross cut, feed width 220 mm
not listed in our site please call 01733 405112
|Safe-Technology Deskside shredder – 3,9 mm strip cut, feed width 220 mm
||Deskside shredder 32204-2SC – 3,9 mm strip cut, feed width 220 mm
not listed in our site please call 01733 405112
|Deskside shredder 32206-2SC – 5,8 mm strip cut, feed width 220 mm
||Deskside shredder 32214-3CC – 3,9 x 40 mm cross cut, feed width 220 mm
||Deskside shredder Safe-Technology 33204-2SC – 3,9 mm strip cut, feed width 220 mm
||Departmental shredder – 5,8 mm strip cut, feed width 260 mm
||Deskside shredder Safe-Technology 33214-3CC – 3,9 x 40 mm cross cut, feed width 220 mm
||Departmental shredder – 3,9 x 40 mm cross cut, feed width 240 mm
not listed in our site please call 01733 405112
|Safe-Technology Departmental shredder – 3,9 x 40 mm cross cut, feed width 240 mm, 64L waste
||Departmental shredder – 3,9 mm strip cut, feed width 240 mm
||Departmental shredder – 5,8 mm strip cut, feed width 310 mm
||Industrial shredder – 0,8 x 12 mm cross cut, feed width 400 mm, 90L waste
These shredders are in the UK and ready to ship. Shredding machine from Dahle for less. Not to be missed. Call 01733 405112 for bulk purchase of this list.
In recent months, DAHLE Sales has been running a promotional offer on DAHLE CleanTEC shredders that has been successful, and allowed us to receive positive feedback on DAHLE’s new product range. As a result of recent success, we’re pleased to announce that this offer is currently extended throughout the month of July 2011.
So what is the offer?
DAHLE 40xxx and 41xxx document shredders are identical in specification, however the 41xxx models contain DAHLE’s SafeTEC and CleanTEC technologies. As a result, these machines are ordinarily a little more expensive than their less equipped counterparts.
The CleanTEC 40-41 deal comes in two parts:
- All 41 shredders are discounted to cost the same as their 40 counterparts.
- All 40 shredder purchases will be asked if they wish to upgrade their order to a 41 counterpart at no additional cost.
Is it time your office got a new shredder? Take a look at what we have on offer!
Posted in Dahle Sales Deals
Tagged CleanTec, dahle, dahle cleantec shredders, dahle sales, dahle shredder, dahle shredders, document shredder, document shredders, dust free shredders, dust free shredding, filter system, paper shredder, shredding machines
Ed Balls’ and Gordon Brown’s notes are reported in the Times today to suggest that there was a “brutal plan” to oust Tony Blair. It seems that dozens of notes were left in a drawer only to be found during the transition. The papers put to bed the role of Ed Balls, Shadow Chancellor in the run up to the removal of Mr Blair and emphasise his lead in the plot.
Oh, if only Mr Balls had carefully shred his notes and not ‘popped them in the drawer’ where they could be discovered and used against him politically.
Shredding the notes would have been the best practice and what better shredding machine than a Dahle Dust Free shredder from Dahle Sales.
We think Ed would have chosen a Dahle CleanTEC 41404. Its a A4 paper shredder strip cut for docments, paper and CDs and DVDs with the unique DAHLE CleanTEC filter system. Powerful motor for high shredding capacity, particularly quiet. During June 2011 this model has been reduced in price to £449.00 +VAT including mainland UK delivery. A small price to pay for privacy. Even MI5 would have struggled to put them back together.
Dahle Sales has the entire range of Dahle Guillotines, Trimmers and Shredders to choose from backed up with get service and spare supplies.
Posted in Business News
Tagged brown blair, ed balls, gordon brown, mr blair, notes, plot to oust blair, shadow chancellor, shredders, shredding machine, shredding notes, tony blair
DAHLE Sales are the UK stockists for DAHLE products in Germany.
Whilst shredders and guillotines are often a considered purchase usually reserved for business due to their capacity and intended volume of use, trimmers are the perfect cost-effective purchase for hobbyists and home offices where low-level high-quality trimming is required.
We have a wide range of trimmers available for a number of intended purposes, varying in specifications such as paper size and cutting capacity.
One of our best selling trimmers, the 00507 is a sturdy A4 paper trimmer that cuts upto 8 sheets of 70gsm A4 paper with the availability of spare cutting heads, and even a cutting head set (ID: 00960) containing three extra cutting types;
- Deckle edge cut
- Perforated edge cut
- Wavy cut
The 00507 is excellent value for money at only £28.50 + VAT.
Buy DAHLE Trimmers from DAHLE Sales today for an incredible cut at a price that won’t be beaten.
Dahle Sales are the UK’s stockist and store for Dahle manufactured Guillotines.
Dahle brings precision German manufacturing and expertise to business guillotines and heavy duty cutters. Dahle Sales in the UK is the stockist and business resource for the entire Dahle range offering hobby trimmers through to industrial guillotines and cutters from stock and ready to ship at prices that will not be beaten.
Take the 00580 with all the features listed below. RRP £1953 +VAT – our normal price £1016 +VAT – On Sale until the end June £915.29 +VAT.
The Dahle Guillotine 580 brings you all these features.. A foot operated clamp makes it easy for large drawings, sheets of art board or packaging grade materials to be quickly and accurately set up for cutting.
- Ground upper and lower blade
- Plexiglas guard plate
- Foot operated clamp
- 2 scale bars calibrated in cm, inch and DIN sizes
- Table pre-printed with DIN sizes
- Guide slots for sturdy back-stop
- Sturdy supporting table with guide slots for backstop and with 2 scale bars to fix the backstop or a narrow-strip cutting device
- Table size with supporting table 865 x 960 mm
- Table size without supporting table 865 x 580 mm
- Includes an integral stand
- Tested according to GS safety regulations
- 5-year warranty, excluding wear parts!
Buy Dahle guillotines from Dahle Sales
Dahle Shredding Machines are extending their product upgrade offer of a new Dust Free shredder for the price of the equivalent Paper Safe model. This means all the benefits of the Safe Tec and Dust free models at the base model price.
So, for example you can buy a CleanTEC 41534 for the same price as you would have paid for a Base Class 40534. That’s a 20% price reduction and a superb shredding machine that was retail recommended price at £2907 +VAT – normally sold by Dahle Sales for £1493 +VAT and now just £1195 +VAT including delivery to mainland UK addresses.
The 41534 is a High Security Level 6 paper shredder A3 with the unique DAHLE CleanTEC filter system. Powerful motor for high shredding capacity, particularly quiet. Solid-steel cutters in special high-grade steel can cope with paper clips and staples. User-friendly electronics with electronic start/stop function controlled by integrated light barrier. Ergonomically designed control panel with illuminated function and information unit. Simple and safe paper infeed. Motor cuts out automatically when waste bag is full and door is open. Auto-reverse function. Energy saving from two inactivity levels.
Dahle Sales CleanTEC savings! Dont miss these great deals as they have to end 30 June 2011.